Canister Lid
This is a print I’ve been meaning to get to for a while. I was so tired of cleaning powder falling from the open holes when I stored the container under the sink. Finally, a top to keep everything contained.
Similar Posts
Hamper Stool Project, Part 2
The photograph above shows the first iteration of part 1. As it was printing, I said to myself that it was too tall. I don’t need that much material for the bottom. After it was finished printing, I thought it was a good size for a table top, but not for my current project. Plus,…
Wen Rotary Tool Table Saw Assembly
This is the final version of the current design phase. I am not planning any additional tweaks in the near future. This alteration was developed for a Wen rotary tool to flatten the jagged edge of a fire-resistant polycarbonate panel. The panel, which was manually cut with hand saws due to necessary design changes and…
Acoustic Frame
Hollow strips hold layers of cotton batting for sound absorption. The strips are connected with wood edgebanding. I used Mahogany edgebanding that was leftover from a past project. I discovered that it is best to assemble the strips with the edgebanding before putting them on the wall. I used 3M Command 10 lb strips to attach…
Air Freshener
A wall-mountable container for activated carbon, designed for closet areas. The decorative webbing is removable for easy filling. The air freshencer attaches to the wall with 3M strips. Activated Carbon This is a link to the activated carbon I use in all the containers I have made.
Hamper Stool Project, Part 4
I have printed all of the parts for the top! I will need to drill holes to secure the hinge, but I know that will not be a problem, mainly because I drilled a hole through one of the mistake parts I made earlier. All of the top parts were printed from two stereolithography files….
Empty Filament Spool & Scrap Wood Wagon
It is almost consistently warm enough in Chicago to continue with the solar oven trials. Thinking about last year’s trials, I realized that the solar oven peformed best during the first day on the ground in the park. It makes sense to return to the park this year. A means of transporting the oven to…
