Canister Lid
This is a print I’ve been meaning to get to for a while. I was so tired of cleaning powder falling from the open holes when I stored the container under the sink. Finally, a top to keep everything contained.
Similar Posts
Wen Rotary Tool Table Saw Assembly
This is the final version of the current design phase. I am not planning any additional tweaks in the near future. This alteration was developed for a Wen rotary tool to flatten the jagged edge of a fire-resistant polycarbonate panel. The panel, which was manually cut with hand saws due to necessary design changes and…
Solar Light Disc Dock
This dock holds three replacement solar light discs for charging by interior windows. Disc sizes that have an outer diameter of about 8.5 x 8.5cm (3.35 x 3.35 inches) and an inner diameter of about 7.5 x 7.5cm (2.95 x 2.95 inches) fit the opening.
Acoustic Frame
Hollow strips hold layers of cotton batting for sound absorption. The strips are connected with wood edgebanding. I used Mahogany edgebanding that was leftover from a past project. I discovered that it is best to assemble the strips with the edgebanding before putting them on the wall. I used 3M Command 10 lb strips to attach…
Acoustic Wall Partition
Last Fall, downsizing to a convertible studio with a separate bed nook felt like a step towards cozy living. However, that illusion was shattered the first morning. Each footstep in the hallway reverberated like a loudspeaker through the gap beneath the solid door. I’d naively blocked similar gaps in past apartments, only to suffer air…
Storybook HueForge
This is my first venture into HueForge filament painting. My goals for printing were to make use of filament remnants remaining on spools and have the Ai generated image feel more like a painting. I used four colors as that is the number of spool holders on the AMS (Automatic Material System, Bambu Lab A1…
Hexa-Hush
Similar to the Acoustic Wall Partition, Hexa-Hush is a hollow form filled with cotton batting for sound absorption. My research proved cotton to be the best infill. For maximum sound absorption, six to eight cotton batting cutouts are recommended. 3M strips can be used to attach the Hexa-Hush to the wall. Here is a link to…
