3d print

The hamper stool project is finished! It is a piece of furniture that combines 3D printed polylactic acid (PLA) filament with wood. It started as a desire to capture the qualities of spiralising filament in a functional piece of furniture using a 8″ x 8″ x 7″ sized print bed. It ended with furniture reminiscent…

The structure of the hamper stool is almost together. I have 4 additional side casings to make and 9 pieces for the back. I ordered a roll of filament on Sunday and I expect it to arrive Friday or Monday. In the meantime, I have been printing the spiral infills. I have never added wheels…

The frame is almost together. The roll of filament I ordered on Sunday arrived yesterday. I have three more parts to print for the bottom. However, I do not have enough hardware to finish putting the parts together. I ordered more yesterday and hopefully it will arrive before the end of next week. I wanted…

I have printed all of the parts for the top! I will need to drill holes to secure the hinge, but I know that will not be a problem, mainly because I drilled a hole through one of the mistake parts I made earlier. All of the top parts were printed from two stereolithography files….

The model shows casters, a hinge, dowels. and a top. I plan to use a 17″ x 12″ piece of pine and the 2″ diameter x 18″ long dowels I have leftover from a previous project. I bought a hinge from Home Depot and screws to attach the casings. I will get the casters and…

The photograph above shows the first iteration of part 1. As it was printing, I said to myself that it was too tall. I don’t need that much material for the bottom. After it was finished printing, I thought it was a good size for a table top, but not for my current project. Plus,…