The chair is nearly ready for printing. I will try to choose one of the filament colors from above this week as Atomic Filament has a sale going on now. First, I must estimate how much filament is needed. I will do that by cutting the chair into parts and placing the parts in Cura….
Building Your Own Enclosure Essential elements of an enclosure are filter assembly box and light. It is best to place the control box on the outside of the enclosure due to its propensity for overheating. An automatic fire stop device is useful if one tends to leave their printer unattended for long periods of time….
In this part, I will be making adjustments to the chair following recommendations from a Wood Magazine article, Must Have Measurements For Comfortable Seating; Pallozorodcarlocom; and measurements from sitting in chairs. The adjustments I make will be specific for me. If you are following along, alter dimensions for your personal comfort. Must Have Measurements for…
With reports of volatile organic compounds (VOCs) and ultra fine particles (UFPs) emissions from 3D printers, you may have wondered if you need an enclosure with ventilation. Expert reports recommend ventilation if you are operating your printer in a poorly ventilated space. 3D printers are electronic devices that heat material to a melting point and…
This is the first of an undetermined number of posts in a chair design series. My goal is to make a completely 3D printed, functional chair based on Enzo Mari’s chair from his book, Enzo Mari – autoprogettazione? My plan is to spend a fair amount of time designing the chair before I begin printing….
I have been working on a printer enclosure for the past month. I decided last year that I needed an enclosure for my Reprap Guru Prusa i3 printer when I coughed a little during prints even though I was printing with non-toxic filament and my prints were curling at the corners. Since printing with the…
A few weeks ago, I almost stopped 3D printing altogether. I was searching the internet, looking for information on how to make the canisters I designed watertight and stumbled upon an article about particulate matter emissions from desktop printers1. What I learned was that all filaments emit particulate matter. This explained the coughing I experienced occasionally…
The hamper stool project is finished! It is a piece of furniture that combines 3D printed polylactic acid (PLA) filament with wood. It started as a desire to capture the qualities of spiralising filament in a functional piece of furniture using a 8″ x 8″ x 7″ sized print bed. It ended with furniture reminiscent…
The structure of the hamper stool is almost together. I have 4 additional side casings to make and 9 pieces for the back. I ordered a roll of filament on Sunday and I expect it to arrive Friday or Monday. In the meantime, I have been printing the spiral infills. I have never added wheels…
The frame is almost together. The roll of filament I ordered on Sunday arrived yesterday. I have three more parts to print for the bottom. However, I do not have enough hardware to finish putting the parts together. I ordered more yesterday and hopefully it will arrive before the end of next week. I wanted…
I have printed all of the parts for the top! I will need to drill holes to secure the hinge, but I know that will not be a problem, mainly because I drilled a hole through one of the mistake parts I made earlier. All of the top parts were printed from two stereolithography files….
The photograph above shows the first iteration of part 1. As it was printing, I said to myself that it was too tall. I don’t need that much material for the bottom. After it was finished printing, I thought it was a good size for a table top, but not for my current project. Plus,…
